Day 10

Day 10, 2 1/4 more hours of work done. Clip... Clip... Clip... That's the sound of trimming some 200+ copper wires that were used to stitch the boat together. Once all those sharp little buggers were off Dad used his Foredom tool to grind off some of the epoxy over flow. He also used it to take the sharp edges off of the glass tape in the bow. We also found that 80 grit sand paper will take off those sharp edges as well.

Day 10 Photos
DAY10-001
DAY10-002
DAY10-003
DAY10-004
DAY10-005
DAY10-006
DAY10-007
DAY10-008
DAY10-009
DAY10-010
DAY10-011
DAY10-012
DAY10-013