Day 7

Day 7, 2 1/2 more hours of work done. We were able to place the fillets in the bottom-to-bottom and bottom-to-side panels in the bow and the stern sections. We also put fillets around the bulkheads on the bow and stern sides. Once we did that, we put in the fiber glass tape and coated it in epoxy. The final task of the night was to put a layer of epoxy in the entire inside of the bow and stern sections. One note... epoxy is sticky. When you get it in the crease of your elbow and your sweatshirt sleeve is rolled up, it hurts like no other when you have to take the sweatshirt off.

Day 7 Photos
DAY7-001
DAY7-002
DAY7-003
DAY7-004
DAY7-005
DAY7-006
DAY7-007