Day 8

Day 8, 2 1/2 more hours of work done. We were able to place the fillets in the bottom-to-bottom and bottom-to-side panels in the cockpit section. We also put fillets around the bulkheads on the cockpit side. Once we did that, we put in the fiber glass tape and coated it in epoxy. The final task of the night was to put a layer of fiber glass cloth entire inside cockpit section. Then we had to coat it in epoxy. One thing we want to do different next time is to trim the rough edge off of the fiberglass tape so it lays down smoother. Dad posted a question (about the fiber glass tape issue) on the CLC Builders Forum, check out this link to see what some fellow builders suggested CLC Builders Forum

Day 8 Photos
DAY8-001
DAY8-002
DAY8-003
DAY8-004
DAY8-005
DAY8-006